Brake Rotor Automatic Balancing Machine bpx
Brake Rotor Automatic Balancing Machine
Brake Rotor Automatic Balancing Machine is suitable for brake discs, brake drums, impellers and other disc parts with a central hole or shaft and diameter φ200-φ450mm.
PRODUCT FEATURES
- The accuracy and the efficiency is high.
- The equipment work cycle (initial test + milling + retest) can reach 40 seconds, and the test and milling are carried out at the same time .
- Single-sided balance, cylindrical or end face milling, quick model change, parameterized adjustment, simple operation and strong compatibility .
- It can be single machine automatic balance, online automatic line for automatic production, and can be equipped with MES system to realize data traceability .
TECHNICAL PARAMETERS
| Two-station Brake Disc Rotor balancing machine | |
| Item | Machine Specification |
| Machine name | Two-station ABM for brake disc Embedded software products – automatic balancing machine control software for brake disc V1.0 |
| Model no. | BPXDX-2W-B |
| Main components specification | Cylinder: SMC |
| Guide rail: HIWIN | |
| Screw: PMI | |
| Servo motor: Mitsubishi、Panasonic | |
| Sensor : KEYENCE, OMRON, CONTROLWAY | |
| Touch screen : KEYENCE 10.4′ | |
| Control PLC: KEYENCE KV-3000 | |
| Cutting motor: ALPHA | |
| Rotor apply range | Inner hole of work-piece：Φ54-91mm（customizable） |
| Outer diameter of work-piece：Φ220-410mm | |
| Cutting width：10-30mm | |
| Cutting depth：<=5mm | |
| Speed | 500-900rpm |
| Cutting method | T cutter outer milling |
| Power supply | AC380V |
| Air supply | 0.4~0.6Mpa |
| Cycle time | 30-40s |
| Residual unbalance | Better than G6.3 |
| Volume | 2300 x1500 x 2100 mm |
Remark: Based on actual specifications (can be negotiated according to customer’s requirement)
if you have any question about product detail please
MARKETING POLE GROUP
Central Office TEL: 0098 5138407354
Email : info@marketingpole.com