Transmission Shaft Balancing Machine
Transmission Shaft Balancing Machine
The special equipment for correcting the imbalance of the automobile transmission shaft has advanced technology, high efficiency, simple operation, intuitive display, rapid measurement and good stability.
Description
Theis series universal balancing machine is classified into three types, RDB series with such characteristics as advanced technology, high efficiency, easy operation, direct indication, rapid measurement and stable performance, is one kind of specific machine for propeller shaft.
Type A, for three planes propeller shaft, can also be used for two planes propeller shaft when the center pedestal is un-mounted. Pneumatic lock and guard bar in center and right pedestal makes operation easy and safe. Type B, for single heavy shaft with two pedestals. Right pedestals locked or unlocked pneumatically. Type D, specially designed for three tubes assembled shaft with four pedestals on one machine bed. Unbalance value and phase can be obtained within single run by previously adjusting the radiuses of two correction planes before starting.
Type B, for single heavy shaft with two pedestals. Right pedestals locked or unlocked pneumatically. Type D, specially designed for three tubes assembled shaft with four pedestals on one machine bed. Unbalance value and phase can be obtained within single run by previously adjusting the radiuses of two correction planes before starting.
Type C, specially designed for three tubes assembled shaft with four pedestals on one machine bed.Unbalance value and phase can be obtained within single run by previously adjusting the radiuses of two correction planes before starting.
PRODUCT FEATURES
- RDB series with such characteristics as advanced technology, high efficiency, easy operation, direct indication, rapid measurement and stable performance.
- Each accessory part adopts international and domestic well-known brand products, such as gearboxes, rolling bearings, low-voltage electrical components, etc.
- Strict and complete quality system, complete technology, testing methods and configuration of various metal processing equipment to ensure product quality.
- Perfect comprehensive supporting capabilities, can provide flexible and diverse options, and provide you with the most optimized product configuration.
TECHNICAL PARAMETERS
| Type | RDB-100A | RDB-100B | RDB-250B | RDB-100D |
| Mass range of rotor （kg） | 5-100 | 5-100 | 5-250 | 20-100 |
| Max. diameter （mm） | φ130 | φ130 | φ150 | φ130 |
| Distance between left and right pedestal（mm） | three pedestals 2400 | max 2400 | max. 3000 | max. 3000 |
| Machine bed length | 4430 | 4430 | 5030 | 5030 |
| Range of journal diameter（mm） | left & right pedestalφ130 | φ130 | φ150 | left & right pedestalφ130 |
| center pedestalφ100 | center pedestalsφ100 | |||
| Balance speed （r/min） | 1600-4000 | 1200-3200 | ||
| Motor power （KW） | 3 | 3 | 7.5 | 3 |
| Max. initial unbalance （g·cm） | 500 | 500 | 1000 | 500 |
| Min. sensitivity （g·cm） | 5 | 5 | 5 | 5 |
| Measuring plane | 3 | 2 | 2 | 4 |
| Dimension（mm） | 4430×740×1000 | 4430×740×1000 | 5030×740×1050 | 5030×720×1000 |
| Option | Welding machine –welds the balance piece on the shaft | |||
| TN1-63/160 welding machine | ||||
| Printer-outputs test results | ||||
Remark: Based on actual specifications (can be negotiated according to customer’s requirement)
if you have any question about product detail please
MARKETING POLE GROUP
Central Office TEL: 0098 5138407354
Email : info@marketingpole.com