Propeller Balancing Machine
Propeller Balancing Machine
Propeller Balancing Machine is a special equipment for correcting the imbalance of the drive shaft of the car, which can correct the imbalance of the single drive shaft. The positioning lock or release after the movement of the right support frame and the lifting and lowering of the safety frame lever are pneumatically controlled.
Description
The equipment of this series can be correctly adjusted according to the radius of the two calibration faces of the rotor before starting, and the unbalance amount and phase of the workpiece can be correctly displayed under one start. The HW310 new generation special electrical measurement system matched with this machine is based on the PLC platform. The measurement is stable, the function is complete, the touch screen operation is possible, and the human-machine dialogue function is powerful. This series of equipment can be equipped with a projection welding machine to meet the welding of the balance plate and the shaft tube when the drive shaft is calibrated, reducing the operator’s working load and improving production efficiency. The balancing machine and the projection welding machine have interlock protection devices. The projection welding machine adopts microcomputer control, with large parameter setting range, high control precision, stable performance and compensation function for the power grid.
PRODUCT FEATURES
- Large parameter setting range, high control precision, stable performance and compensation function for the power grid.
- Each accessory part adopts international and domestic well-known brand products, such as gearboxes, rolling bearings, low-voltage electrical components, etc.
- Strict and complete quality system, complete technology, testing methods and configuration of various metal processing equipment to ensure product quality.
- Perfect comprehensive supporting capabilities, can provide flexible and diverse options, and provide you with the most optimized product configuration.
TECHNICAL PARAMETERS
| Item | Technical Specification |
| Workpiece quality range (including fixture) | 5～100 kg |
| Maximum shaft diameter of the workpiece | ≤Φ130 mm |
| Maximum length of workpiece | ≤2400mm |
| Rotor speed range (stepless speed regulation when frequency conversion | ≤3200r/min |
| 4800r/min（Only for short-term speed test speed） | |
| Remarks: The measuring speed can be increased to 5000r/min according to user requirements. | |
| Motor Power | 3 kW |
| Allowable maximum initial imbalance | ≤500 g·cm |
| Minimum reachable residual imbalance | 5 g.cm |
| Measuring surface | 2 planes |
Remark: Based on actual specifications (can be negotiated according to customer’s requirement)
if you have any question about product detail please
MARKETING POLE GROUP
Central Office TEL: 0098 5138407354
Email : info@marketingpole.com