EV Motor special Balancing Machines
EV Motor Special Balancing Machines
The hardware filter circuit is used to reduce the interference of external vibration and other interference, and can achieve high-precision measurement.
PRODUCT FEATURES
- The hardware filter circuit is used to reduce the interference of external vibration and other interference, and can achieve high-precision measurement.
- Adopt servo motor pulse control to control the angle of unbalance, which can realize precise positioning.
- Since there is actually no rotor with zero unbalance, the correction method of this device adopts the unbalance electric zero adjustment method, so there is no need to specially make a standard rotor with zero unbalance.
- Because it uses PLC control and is equipped with a fully functional software system, the relevant setting parameters and rotor types can be set and input at one time, and can be called arbitrarily in the future.
TECHNICAL PARAMETERS
| Automatic Balancing Machine for EV Motor ( Driving Motor of Passenger Car ) | |
| Volume | 2000mm(L)X1700mm(W)X1200mm(H） |
| Weight | 2T |
| Unbalance accuracy | G0.4~G2.5 |
| Miniumum residual unbalance | 0.1gmm/kg |
| Unbalance removal rate | ≥95% |
| Once removal rate | ≥90% |
| Mearsuring speed | 1080～2150rpm (may change according to different rotor diameter and weight) |
| Cycle time | 100s(may change according to the initial unbalance） |
| Working capability | Cm＞1.67；Cmk＞1.67 |
| Overall Equipment Effectiveness（O.E.E.） | ≥85% |
| Noise level | ＜80db |
| Type conversion time | ≤15min/person |
| Rotor diameter | Φ90-φ240mm |
| Rotor stack length | 70-300mm |
| Rotor shaft diameter | φ20-φ80mm |
| Rotor length | 150-550mm |
| Rotor weight | 5-50kg |
| Cutting position diameter | φ90-φ220mm |
| Cutter diameter | 5-12mm |
Remark: Based on actual specifications (can be negotiated accroding to customer’s requiement)
if you have any question about product detail please
MARKETING POLE GROUP
Central Office TEL: 0098 5138407354
Email : info@marketingpole.com