Belt Drive Balancing Machines 100k
Belt Drive Balancing Machine 100K
Belt drive balancing machine is a special equipment for correcting the imbalance of the drive shaft of the car, which can correct the imbalance of the two drive shafts at the same time.
Description
This series of equipment is a special equipment for correcting the imbalance of the drive shaft of the car, which can correct the imbalance of the two drive shafts at the same time. The positioning lock or release after the movement of the middle and right support frames and the lifting and lowering of the safety frame lever are pneumatically controlled. The machine has advanced technology, high efficiency, simple operation, intuitive display, rapid measurement and good stability.
The equipment of this series can be correctly adjusted according to the radius of the two calibration faces of the rotor before starting, and the unbalance amount and phase of the workpiece can be correctly displayed under one start. The HW310 new generation special electrical measurement system matched with this machine is based on the PLC platform. The measurement is stable, the function is complete, the touch screen operation is possible, and the human-machine dialogue function is powerful.
This series of equipment can be equipped with a projection welding machine to meet the welding of the balance plate and the shaft tube when the drive shaft is calibrated, reducing the operator’s working load and improving production efficiency. The balancing machine and the projection welding machine have interlock protection devices. The projection welding machine adopts microcomputer control, with large parameter setting range, high control precision, stable performance and compensation function for the power grid.
TECHNICAL PARAMETERS
Rotor weight range (including fixture) | 5~100 kg |
Maximum shaft diameter of the workpiece | ≤Φ130 mm(The maximum diameter of the intermediate support frame is Φ100mm) |
Maximum length of the workpiece | ≤2400mm |
Rotor speed range (stepless speed regulation when frequency conversion) | ≤3200r/min |
4800r/min(Only for short-term speed test speed) | |
Remarks: The measuring speed can be increased to 5000r/min according to user requirements. | |
Motor Power | 3 kW |
Maximum initial imbalance | ≤500 g·cm |
Minimum reachable residual imbalance | 5 g.cm |
Measuring surface | 3 |
Remark: Based on actual specifications (can be negotiated according to customer’s requirement)
if you have any question about product detail please
MARKETING POLE GROUP
Central Office TEL: 0098 5138407354
Email : info@marketingpole.com