Motor Rotor Balancing Machine with Drilling Correction
![](https://marketingpole.com/wp-content/uploads/2022/02/MARKETING-POLE-ARM-300x126.png)
![Motor Rotor Balancing Machine with Drilling Correction](https://marketingpole.com/wp-content/uploads/2022/03/Motor-Rotor-Balancing-Machine-with-Drilling-Correction-300x225.jpg)
Motor Rotor Balancing Machine with Drilling Correction
1.Simple to use software with intuitive unbalance correction displays.
2.Ultra-high accuracy and repeatability.
3.Global supply and global support.
Description
Motor rotor balancing machine with drilling correction is a mechatronics device used to measure the dynamic balance of the rotor of a new energy motor. It uses a PLC as the main control machine to complete test-related calculations and rotor phase control, and a touch screen as a man-machine communication interface for parameter setting and the operation of the machine, which makes the operation very simple.
Using a single system control, the setting of rotor parameters, the entry of rotor types, the processing of unbalanced data, and the replacement of tools and fixtures in the measuring unit can be easily completed. It also has the function of data recording.
PRODUCT FEATURES
- The hardware filter circuit is used to reduce the interference of external vibration and other interference, and can achieve high-precision measurement.
- As it uses PLC control and equipped with a fully functional software system, the relevant setting parameters, rotor type, etc. can be set and input at one time.
- Since there is actually no rotor with zero unbalance, the correction method of this device adopts the unbalance electric zero adjustment method, so there is no need to specially make a standard rotor with zero unbalance.
- It can be equipped with manual vertical and horizontal deduplication devices according to requirements.
![Motor Rotor Balancing Machine with Drilling Correction](https://marketingpole.com/wp-content/uploads/2022/03/Motor-Rotor-Balancing-Machine-with-Drilling-Correction-1.jpg)
TECHNICAL PARAMETERS
Motor Rotor Balancing Machine with Drilling Correction | |
Item | Technical Specification |
Min. achievable residual unbalance | 0.1gmm/kg |
Unbalance reduction rate | ≥95% |
Balancing Accuracy | G2.5 |
Outer diameter of rotor support part | φ8-φ120mm |
Maximum rotor outer diameter | φ500mm |
Support distance | 150-600mm |
Max.Rotor weight | 100kg |
Measuring Speed | 1650rpm |
Power Supply | Three Phase 380V±10%,50HZ |
Drive Motor | 0.75kW Three-phase asynchronous motor(Manufacturer:ABB) |
Remark: Based on actual specifications (can be negotiated according to customer’s requirement)
if you have any question about product detail please
MARKETING POLE GROUP
Central Office TEL: 0098 5138407354
Email : info@marketingpole.com